Fire Safety Check in Kingston upon Thames
Smoke, heat and carbon monoxide alarm testing and certification to BS 5839-6. Covering KT1, KT2, KT3, KT5, KT6 and the wider Kingston upon Thames area.
Fire Safety Check in Kingston upon Thames from
£65inc VAT
up to 3 alarms · testing and certification
Fire Safety Check for Kingston upon Thames landlords
Landlords across Kingston upon Thames book our fire safety check service every week. Kingston upon Thames covers KT1, KT2, KT3, KT5 and the wider Kingston upon Thames area, with housing stock that ranges from a riverside town with Victorian terraces, suburban semis and a significant student rental market near Kingston University. Our accredited engineers attend at short notice, carry out the inspection on site, and issue your Fire Safety Check the same day — whether the property sits close to Kingston town centre or on the Richmond upon Thames, Merton and Sutton border.
Fire safety obligations in Kingston upon Thames vary sharply by building type: a single-family let near Kingston town centre carries a different regime from a communal building or HMO on a higher-storey street. Our Fire Safety Check is scoped to the actual building rather than a generic template, and we document the reasoning so your record stands up to a fire officer inspection.
The Fire Safety Check is a formal inspection and test of the fire detection in a property: smoke alarms, heat alarms and carbon monoxide alarms. We verify that each device is the correct type for its location, correctly positioned, within its expiry date, properly interlinked where required, and actually functional when tested with real smoke or heat rather than just the test button. You receive a certificate listing every device with its type, location, age and result.
Where we work in Kingston upon Thames
We cover Kingston upon Thames in full — every postcode from KT1 through KT6 — and also the neighbouring boroughs of Richmond upon Thames, Merton and Sutton in the same visit routing. Where a job falls inside the Central London Congestion Charge zone, or paid parking applies at the property, both are always shown up front on your quote rather than added afterwards.
Neighbouring boroughs we also cover: Richmond upon Thames, Merton, Sutton. Booking two services in the same visit — for example a Fire Safety Check and a Gas Safety Certificate — saves your tenant a second appointment.
Your legal duty
The Smoke and Carbon Monoxide Alarm (England) Regulations 2015, as amended in 2022, require a smoke alarm on every storey of a rented property used as living accommodation, and a carbon monoxide alarm in any room used as living accommodation containing a fixed combustion appliance other than a gas cooker. Alarms must be tested and confirmed working on the first day of a new tenancy, and must be repaired or replaced once the landlord is informed of a fault. The 2022 amendment extended the duties to social housing and made the repair obligation explicit. Licensed HMOs face additional requirements — usually a Grade A or interlinked Grade D system to BS 5839-6 — set through licence conditions and the fire risk assessment. Local authorities can impose a penalty of up to £5,000 for breach.
Your Fire Safety Check in Kingston upon Thames
Accredited engineers, all-inclusive pricing and same-day certificates.
Fire Safety Check in Kingston upon Thames — common questions
We can normally attend a Kingston upon Thames property within a day or two, often the same day for urgent jobs. Our engineers routinely work across KT1, KT2, KT3 and the surrounding Kingston town centre area, so scheduling around your tenant's availability is usually straightforward.
Yes — every postcode in the borough, from KT1 through KT6. If you also let property just over the border in Richmond upon Thames or Merton, we can bundle both into a single visit.
Yes — our Fire Safety Check starts at £65 inc VAT everywhere we cover, including Kingston upon Thames. Where a job in Kingston upon Thames falls inside the Central London Congestion Charge zone, or paid parking applies at the property, both are passed on at cost and always shown on the quote before you confirm.
A Fire Safety Check (Smoke & Heat Alarm Certificate) in Kingston upon Thames starts from £65 inc VAT. up to 3 alarms · testing and certification. All prices are all-inclusive with no hidden call-out fees — the only extras are parking (£5) and the Central London Congestion Charge (£18) where they genuinely apply, and we always disclose these before you confirm.
Yes. All our engineers hold the appropriate accreditations — Gas Safe Registered for gas safety work, NICEIC / NAPIT certified for electrical inspections, and accredited DEAs for EPCs. We carry full public liability insurance and back every job with a 12-month workmanship guarantee.
Yes — fill in our short contact form and we'll come straight back with a confirmed appointment and an all-inclusive price, usually within the hour. You can also call 07426 409342 and we'll book you in within two minutes.
Book your Fire Safety Check in Kingston upon Thames today
Fill in the form and we'll confirm your appointment and an all-inclusive price, usually within the hour. Prefer to talk? Call us and we'll book you in within two minutes.
More certificates in Kingston upon Thames
Bundle your compliance in a single visit and save time.
Ready to get compliant?
Book your certificate today and have it in your inbox sooner than you'd expect. Friendly, accredited engineers across every London borough.