Skip to content
Barnet EPC

EPC in Barnet

Accredited Energy Performance Certificates for lettings and sales. Covering N2, N3, N12, N20, NW4, NW7, EN4, EN5 and the wider Barnet area.

From £99.99 inc VAT Lodged on the register within 24 hours 12-month workmanship guarantee

EPC in Barnet from

£99.99inc VAT

studio · accredited domestic energy assessors

Accredited domestic energy assessors
Lodged on the national register within 24 hours
Existing insulation and upgrades evidenced, not defaulted away
Clear MEES advice — where you stand and what gets you to E and beyond
Get a free quote
EPC in Barnet

EPC for Barnet landlords

Landlords across Barnet book our epc service every week. Barnet covers N2, N3, N12, N20 and the wider Barnet area, with housing stock that ranges from London's most populous borough, with everything from Edwardian houses in Finchley to suburban semis in Mill Hill and Chipping Barnet. Our accredited engineers attend at short notice, carry out the inspection on site, and issue your EPC the same day — whether the property sits close to High Barnet and Finchley Central or on the Harrow, Brent and Camden border.

Every rented property in Barnet needs a valid EPC on the register before it can be marketed, and MEES sets a minimum band E for both new lets and — since April 2020 — continuing tenancies. Getting the paperwork evidenced properly matters: undocumented insulation and glazing in Barnet's older stock can cost you a full band on the rating.

An Energy Performance Certificate rates a property's energy efficiency from A to G and sets out the measures that would improve it. An accredited domestic energy assessor surveys the property, recording construction, insulation, glazing, heating, controls and hot water, then produces the certificate and lodges it on the national EPC register. You legally need a valid EPC before marketing a property to let or sell, and you need at least an E rating to let it at all.

Postcodes covered

Where we work in Barnet

N2 N3 N12 N20 NW4 NW7 EN4 EN5

We cover Barnet in full — every postcode from N2 through EN5 — and also the neighbouring boroughs of Harrow, Brent, Camden and Enfield in the same visit routing. Where a job falls inside the Central London Congestion Charge zone, or paid parking applies at the property, both are always shown up front on your quote rather than added afterwards.

Neighbouring boroughs we also cover: Harrow, Brent, Camden, Enfield. Booking two services in the same visit — for example a EPC and a Gas Safety Certificate — saves your tenant a second appointment.

EPCs, MEES and your obligations

The Energy Performance of Buildings (England and Wales) Regulations 2012 require a valid EPC before a property is marketed for sale or let, with the rating shown in any advertisement and a copy given to the tenant or buyer. An EPC is valid for ten years. Separately, the Energy Efficiency (Private Rented Property) (England and Wales) Regulations 2015 — the MEES regulations — make it unlawful to let a domestic property with an EPC rating below E, and since April 2020 that applies to all existing tenancies, not just new ones. Where you cannot reach E, you must register a valid exemption on the PRS Exemptions Register; you cannot simply let it anyway. Penalties for letting a sub-standard property reach £5,000 per property, and non-compliance is published on the register.

What's included

Your EPC in Barnet

Accredited engineers, all-inclusive pricing and same-day certificates.

Accredited domestic energy assessors
Lodged on the national register within 24 hours
Existing insulation and upgrades evidenced, not defaulted away
Clear MEES advice — where you stand and what gets you to E and beyond
Recommendation report prioritised by actual effect on the rating
Combine with a gas or electrical visit to save a tenant appointment
FAQs

EPC in Barnet — common questions

We can normally attend a Barnet property within a day or two, often the same day for urgent jobs. Our engineers routinely work across N2, N3, N12 and the surrounding High Barnet and Finchley Central area, so scheduling around your tenant's availability is usually straightforward.

Yes — every postcode in the borough, from N2 through EN5. If you also let property just over the border in Harrow or Brent, we can bundle both into a single visit.

Yes — our EPC starts at £99.99 inc VAT everywhere we cover, including Barnet. Where a job in Barnet falls inside the Central London Congestion Charge zone, or paid parking applies at the property, both are passed on at cost and always shown on the quote before you confirm.

A EPC (Energy Performance Certificate) in Barnet starts from £99.99 inc VAT. studio · accredited domestic energy assessors. All prices are all-inclusive with no hidden call-out fees — the only extras are parking (£5) and the Central London Congestion Charge (£18) where they genuinely apply, and we always disclose these before you confirm.

Yes. All our engineers hold the appropriate accreditations — Gas Safe Registered for gas safety work, NICEIC / NAPIT certified for electrical inspections, and accredited DEAs for EPCs. We carry full public liability insurance and back every job with a 12-month workmanship guarantee.

Yes — fill in our short contact form and we'll come straight back with a confirmed appointment and an all-inclusive price, usually within the hour. You can also call 07426 409342 and we'll book you in within two minutes.

Book in Barnet

Book your EPC in Barnet today

Fill in the form and we'll confirm your appointment and an all-inclusive price, usually within the hour. Prefer to talk? Call us and we'll book you in within two minutes.

Call our team

07426 409342

Mon–Sat · bookings confirmed in under 2 minutes

We'll only use your details to respond to your enquiry. No spam, ever.

Ready to get compliant?

Book your certificate today and have it in your inbox sooner than you'd expect. Friendly, accredited engineers across every London borough.

CallGet a quote